autopkgtest [09:54:24]: git checkout: d546440 autopkgtest: Disambiguate apt-source vs. tree autopkgtest [09:54:24]: host cyclops-node04; command line: /home/auto-package-testing/autopkgtest/runner/autopkgtest --output-dir /data/adttmp/autopkgtest-work.LarFaL/out --timeout-copy=6000 --setup-commands 'sed -i "s/ports.ubuntu.com/ftpmaster.internal/; s/ubuntu-ports/ubuntu/" /etc/apt/sources.list `ls /etc/apt/sources.list.d/*.list 2>/dev/null || true`; ln -s /dev/null /etc/systemd/system/bluetooth.service' --setup-commands 'printf "http_proxy=http://squid.internal:3128\nhttps_proxy=http://squid.internal:3128\nno_proxy=127.0.0.1,127.0.1.1,localhost,localdomain,novalocal,internal,archive.ubuntu.com,security.ubuntu.com,ddebs.ubuntu.com,launchpad.net,10.24.0.0/24\n" >> /etc/environment' --apt-pocket=proposed --apt-upgrade linux-raspi2 --timeout-test=40000 --env=ADT_TEST_TRIGGERS=linux-meta-raspi2/4.4.0.1012.12 --setup-commands 'apt-get install -y linux-image-raspi2 linux-headers-raspi2 || apt-get install -y linux-image-generic-raspi2 linux-headers-generic-raspi2' -- lxc --sudo autopkgtest-yakkety autopkgtest [09:54:51]: @@@@@@@@@@@@@@@@@@@@ test bed setup Get:1 http://ports.ubuntu.com/ubuntu-ports yakkety-proposed InRelease [95.7 kB] Get:2 http://ports.ubuntu.com/ubuntu-ports yakkety-proposed/main Sources [38.2 kB] Get:3 http://ports.ubuntu.com/ubuntu-ports yakkety-proposed/universe Sources [325 kB] Get:4 http://ports.ubuntu.com/ubuntu-ports yakkety-proposed/multiverse Sources [5,112 B] Get:5 http://ports.ubuntu.com/ubuntu-ports yakkety-proposed/main armhf Packages [92.6 kB] Get:6 http://ports.ubuntu.com/ubuntu-ports yakkety-proposed/universe armhf Packages [434 kB] Get:7 http://ports.ubuntu.com/ubuntu-ports yakkety-proposed/multiverse armhf Packages [2,700 B] Fetched 993 kB in 2s (483 kB/s) Reading package lists... Get:1 http://ftpmaster.internal/ubuntu yakkety InRelease [247 kB] Get:2 http://ftpmaster.internal/ubuntu yakkety-updates InRelease [92.2 kB] Get:3 http://ftpmaster.internal/ubuntu yakkety-proposed InRelease [95.7 kB] Get:4 http://ftpmaster.internal/ubuntu yakkety/main Sources [867 kB] Get:5 http://ftpmaster.internal/ubuntu yakkety/restricted Sources [4,836 B] Get:6 http://ftpmaster.internal/ubuntu yakkety/universe Sources [7,922 kB] Get:7 http://ftpmaster.internal/ubuntu yakkety/multiverse Sources [181 kB] Get:8 http://ftpmaster.internal/ubuntu yakkety/main armhf Packages [1,142 kB] Get:9 http://ftpmaster.internal/ubuntu yakkety/restricted armhf Packages [5,100 B] Get:10 http://ftpmaster.internal/ubuntu yakkety/universe armhf Packages [7,475 kB] Get:11 http://ftpmaster.internal/ubuntu yakkety/multiverse armhf Packages [123 kB] Get:12 http://ftpmaster.internal/ubuntu yakkety-proposed/main Sources [38.2 kB] Get:13 http://ftpmaster.internal/ubuntu yakkety-proposed/universe Sources [325 kB] Get:14 http://ftpmaster.internal/ubuntu yakkety-proposed/multiverse Sources [5,112 B] Get:15 http://ftpmaster.internal/ubuntu yakkety-proposed/main armhf Packages [92.6 kB] Get:16 http://ftpmaster.internal/ubuntu yakkety-proposed/universe armhf Packages [434 kB] Get:17 http://ftpmaster.internal/ubuntu yakkety-proposed/multiverse armhf Packages [2,700 B] Fetched 19.1 MB in 15s (1,203 kB/s) Reading package lists... Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... The following packages were automatically installed and are no longer required: linux-headers-4.4.0-23 linux-headers-4.4.0-23-generic Use 'apt autoremove' to remove them. The following NEW packages will be installed: linux-headers-4.4.0-24 linux-headers-4.4.0-24-generic The following packages will be upgraded: gcc-6-base libdebconfclient0 libgcc1 libseccomp2 libstdc++6 linux-headers-generic 6 upgraded, 2 newly installed, 0 to remove and 0 not upgraded. Need to get 11.2 MB of archives. After this operation, 77.6 MB of additional disk space will be used. Get:1 http://ftpmaster.internal/ubuntu yakkety-proposed/main armhf gcc-6-base armhf 6.1.1-6ubuntu11 [17.1 kB] Get:2 http://ftpmaster.internal/ubuntu yakkety-proposed/main armhf libstdc++6 armhf 6.1.1-6ubuntu11 [356 kB] Get:3 http://ftpmaster.internal/ubuntu yakkety-proposed/main armhf libgcc1 armhf 1:6.1.1-6ubuntu11 [38.6 kB] Get:4 http://ftpmaster.internal/ubuntu yakkety/main armhf libdebconfclient0 armhf 0.213ubuntu1 [5,632 B] Get:5 http://ftpmaster.internal/ubuntu yakkety-proposed/main armhf libseccomp2 armhf 2.3.1-2ubuntu1 [30.0 kB] Get:6 http://ftpmaster.internal/ubuntu yakkety-proposed/main armhf linux-headers-4.4.0-24 all 4.4.0-24.43 [9,937 kB] Get:7 http://ftpmaster.internal/ubuntu yakkety-proposed/main armhf linux-headers-4.4.0-24-generic armhf 4.4.0-24.43 [799 kB] Get:8 http://ftpmaster.internal/ubuntu yakkety-proposed/main armhf linux-headers-generic armhf 4.4.0.24.25 [2,290 B] Fetched 11.2 MB in 5s (2,195 kB/s) (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 37969 files and directories currently installed.) Preparing to unpack .../gcc-6-base_6.1.1-6ubuntu11_armhf.deb ... Unpacking gcc-6-base:armhf (6.1.1-6ubuntu11) over (6.1.1-4ubuntu11) ... Setting up gcc-6-base:armhf (6.1.1-6ubuntu11) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 37969 files and directories currently installed.) Preparing to unpack .../libstdc++6_6.1.1-6ubuntu11_armhf.deb ... Unpacking libstdc++6:armhf (6.1.1-6ubuntu11) over (6.1.1-4ubuntu11) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... Setting up libstdc++6:armhf (6.1.1-6ubuntu11) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 37969 files and directories currently installed.) Preparing to unpack .../libgcc1_1%3a6.1.1-6ubuntu11_armhf.deb ... Unpacking libgcc1:armhf (1:6.1.1-6ubuntu11) over (1:6.1.1-4ubuntu11) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... Setting up libgcc1:armhf (1:6.1.1-6ubuntu11) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 37969 files and directories currently installed.) Preparing to unpack .../libdebconfclient0_0.213ubuntu1_armhf.deb ... Unpacking libdebconfclient0:armhf (0.213ubuntu1) over (0.198ubuntu1) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... Setting up libdebconfclient0:armhf (0.213ubuntu1) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 37969 files and directories currently installed.) Preparing to unpack .../libseccomp2_2.3.1-2ubuntu1_armhf.deb ... Unpacking libseccomp2:armhf (2.3.1-2ubuntu1) over (2.2.3-3ubuntu3) ... Selecting previously unselected package linux-headers-4.4.0-24. Preparing to unpack .../linux-headers-4.4.0-24_4.4.0-24.43_all.deb ... Unpacking linux-headers-4.4.0-24 (4.4.0-24.43) ... Selecting previously unselected package linux-headers-4.4.0-24-generic. Preparing to unpack .../linux-headers-4.4.0-24-generic_4.4.0-24.43_armhf.deb ... Unpacking linux-headers-4.4.0-24-generic (4.4.0-24.43) ... Preparing to unpack .../linux-headers-generic_4.4.0.24.25_armhf.deb ... Unpacking linux-headers-generic (4.4.0.24.25) over (4.4.0.23.24) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... Setting up libseccomp2:armhf (2.3.1-2ubuntu1) ... Setting up linux-headers-4.4.0-24 (4.4.0-24.43) ... Setting up linux-headers-4.4.0-24-generic (4.4.0-24.43) ... Setting up linux-headers-generic (4.4.0.24.25) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... Reading package lists... Building dependency tree... Reading state information... The following packages were automatically installed and are no longer required: linux-headers-4.4.0-23 linux-headers-4.4.0-23-generic Use 'apt autoremove' to remove them. The following additional packages will be installed: devio flash-kernel linux-firmware linux-headers-4.4.0-1012-raspi2 linux-image-4.4.0-1012-raspi2 linux-raspi2-headers-4.4.0-1012 Suggested packages: u-boot-tools fdutils linux-raspi2-tools The following NEW packages will be installed: devio flash-kernel linux-firmware linux-headers-4.4.0-1012-raspi2 linux-headers-raspi2 linux-image-4.4.0-1012-raspi2 linux-image-raspi2 linux-raspi2-headers-4.4.0-1012 0 upgraded, 8 newly installed, 0 to remove and 0 not upgraded. Need to get 79.8 MB of archives. After this operation, 316 MB of additional disk space will be used. Get:1 http://ftpmaster.internal/ubuntu yakkety-proposed/universe armhf linux-image-4.4.0-1012-raspi2 armhf 4.4.0-1012.16 [35.5 MB] Get:2 http://ftpmaster.internal/ubuntu yakkety/main armhf devio armhf 1.2-1.2 [15.1 kB] Get:3 http://ftpmaster.internal/ubuntu yakkety/main armhf flash-kernel armhf 3.0~rc.4ubuntu62 [18.3 kB] Get:4 http://ftpmaster.internal/ubuntu yakkety/main armhf linux-firmware all 1.158 [33.7 MB] Get:5 http://ftpmaster.internal/ubuntu yakkety-proposed/universe armhf linux-raspi2-headers-4.4.0-1012 armhf 4.4.0-1012.16 [9,973 kB] Get:6 http://ftpmaster.internal/ubuntu yakkety-proposed/universe armhf linux-headers-4.4.0-1012-raspi2 armhf 4.4.0-1012.16 [677 kB] Get:7 http://ftpmaster.internal/ubuntu yakkety-proposed/universe armhf linux-headers-raspi2 armhf 4.4.0.1012.12 [2,254 B] Get:8 http://ftpmaster.internal/ubuntu yakkety-proposed/universe armhf linux-image-raspi2 armhf 4.4.0.1012.12 [2,256 B] Fetched 79.8 MB in 17s (4,454 kB/s) Selecting previously unselected package linux-image-4.4.0-1012-raspi2. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 64927 files and directories currently installed.) Preparing to unpack .../linux-image-4.4.0-1012-raspi2_4.4.0-1012.16_armhf.deb ... Done. Unpacking linux-image-4.4.0-1012-raspi2 (4.4.0-1012.16) ... Selecting previously unselected package devio. Preparing to unpack .../devio_1.2-1.2_armhf.deb ... Unpacking devio (1.2-1.2) ... Selecting previously unselected package flash-kernel. Preparing to unpack .../flash-kernel_3.0~rc.4ubuntu62_armhf.deb ... Unpacking flash-kernel (3.0~rc.4ubuntu62) ... Selecting previously unselected package linux-firmware. Preparing to unpack .../linux-firmware_1.158_all.deb ... Unpacking linux-firmware (1.158) ... Selecting previously unselected package linux-raspi2-headers-4.4.0-1012. Preparing to unpack .../linux-raspi2-headers-4.4.0-1012_4.4.0-1012.16_armhf.deb ... Unpacking linux-raspi2-headers-4.4.0-1012 (4.4.0-1012.16) ... Selecting previously unselected package linux-headers-4.4.0-1012-raspi2. Preparing to unpack .../linux-headers-4.4.0-1012-raspi2_4.4.0-1012.16_armhf.deb ... Unpacking linux-headers-4.4.0-1012-raspi2 (4.4.0-1012.16) ... Selecting previously unselected package linux-headers-raspi2. Preparing to unpack .../linux-headers-raspi2_4.4.0.1012.12_armhf.deb ... Unpacking linux-headers-raspi2 (4.4.0.1012.12) ... Selecting previously unselected package linux-image-raspi2. Preparing to unpack .../linux-image-raspi2_4.4.0.1012.12_armhf.deb ... Unpacking linux-image-raspi2 (4.4.0.1012.12) ... Setting up linux-image-4.4.0-1012-raspi2 (4.4.0-1012.16) ... Running depmod. update-initramfs: deferring update (hook will be called later) Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/apt-auto-removal 4.4.0-1012-raspi2 /boot/vmlinuz-4.4.0-1012-raspi2 run-parts: executing /etc/kernel/postinst.d/initramfs-tools 4.4.0-1012-raspi2 /boot/vmlinuz-4.4.0-1012-raspi2 update-initramfs: Generating /boot/initrd.img-4.4.0-1012-raspi2 Setting up devio (1.2-1.2) ... Setting up flash-kernel (3.0~rc.4ubuntu62) ... Setting up linux-firmware (1.158) ... Setting up linux-raspi2-headers-4.4.0-1012 (4.4.0-1012.16) ... Setting up linux-headers-4.4.0-1012-raspi2 (4.4.0-1012.16) ... Setting up linux-headers-raspi2 (4.4.0.1012.12) ... Setting up linux-image-raspi2 (4.4.0.1012.12) ... autopkgtest [09:57:07]: rebooting testbed after setup commands that affected boot autopkgtest [09:57:27]: testbed running kernel: Linux 3.13.0-83-generic #127-Ubuntu SMP Fri Mar 11 00:33:07 UTC 2016 autopkgtest [09:57:27]: testbed dpkg architecture: armhf autopkgtest [09:57:28]: @@@@@@@@@@@@@@@@@@@@ apt-source linux-raspi2 Reading package lists... Building dependency tree... Reading state information... Correcting dependencies...Starting pkgProblemResolver with broken count: 0 Starting 2 pkgProblemResolver with broken count: 0 Done Done Starting pkgProblemResolver with broken count: 0 Starting 2 pkgProblemResolver with broken count: 0 Done The following packages were automatically installed and are no longer required: linux-headers-4.4.0-23 linux-headers-4.4.0-23-generic Use 'apt autoremove' to remove them. The following additional packages will be installed: binutils dpkg-dev libdpkg-perl libgdbm3 libperl5.22 make patch perl perl-modules-5.22 xz-utils Suggested packages: binutils-doc debian-keyring gcc | c-compiler make-doc ed diffutils-doc perl-doc libterm-readline-gnu-perl | libterm-readline-perl-perl Recommended packages: gcc | c-compiler build-essential fakeroot libalgorithm-merge-perl libfile-fcntllock-perl rename The following NEW packages will be installed: binutils dpkg-dev libdpkg-perl libgdbm3 libperl5.22 make patch perl perl-modules-5.22 xz-utils 0 upgraded, 10 newly installed, 0 to remove and 0 not upgraded. 1 not fully installed or removed. Need to get 9,111 kB of archives. After this operation, 46.2 MB of additional disk space will be used. Get:1 http://ftpmaster.internal/ubuntu yakkety/main armhf perl-modules-5.22 all 5.22.2-1 [2,642 kB] Get:2 http://ftpmaster.internal/ubuntu yakkety/main armhf libgdbm3 armhf 1.8.3-13.1ubuntu1 [15.3 kB] Get:3 http://ftpmaster.internal/ubuntu yakkety/main armhf libperl5.22 armhf 5.22.2-1 [2,708 kB] Get:4 http://ftpmaster.internal/ubuntu yakkety/main armhf perl armhf 5.22.2-1 [237 kB] Get:5 http://ftpmaster.internal/ubuntu yakkety/main armhf libdpkg-perl all 1.18.7ubuntu1 [202 kB] Get:6 http://ftpmaster.internal/ubuntu yakkety/main armhf xz-utils armhf 5.1.1alpha+20120614-2ubuntu2 [77.8 kB] Get:7 http://ftpmaster.internal/ubuntu yakkety/main armhf patch armhf 2.7.5-1 [82.7 kB] Get:8 http://ftpmaster.internal/ubuntu yakkety/main armhf make armhf 4.1-9 [137 kB] Get:9 http://ftpmaster.internal/ubuntu yakkety/main armhf binutils armhf 2.26-10ubuntu3 [2,344 kB] Get:10 http://ftpmaster.internal/ubuntu yakkety/main armhf dpkg-dev all 1.18.7ubuntu1 [666 kB] Fetched 9,111 kB in 4s (1,960 kB/s) Selecting previously unselected package perl-modules-5.22. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 94566 files and directories currently installed.) Preparing to unpack .../perl-modules-5.22_5.22.2-1_all.deb ... Unpacking perl-modules-5.22 (5.22.2-1) ... Selecting previously unselected package libgdbm3:armhf. Preparing to unpack .../libgdbm3_1.8.3-13.1ubuntu1_armhf.deb ... Unpacking libgdbm3:armhf (1.8.3-13.1ubuntu1) ... Selecting previously unselected package libperl5.22:armhf. Preparing to unpack .../libperl5.22_5.22.2-1_armhf.deb ... Unpacking libperl5.22:armhf (5.22.2-1) ... Selecting previously unselected package perl. Preparing to unpack .../perl_5.22.2-1_armhf.deb ... Unpacking perl (5.22.2-1) ... Selecting previously unselected package libdpkg-perl. Preparing to unpack .../libdpkg-perl_1.18.7ubuntu1_all.deb ... Unpacking libdpkg-perl (1.18.7ubuntu1) ... Selecting previously unselected package xz-utils. Preparing to unpack .../xz-utils_5.1.1alpha+20120614-2ubuntu2_armhf.deb ... Unpacking xz-utils (5.1.1alpha+20120614-2ubuntu2) ... Selecting previously unselected package patch. Preparing to unpack .../patch_2.7.5-1_armhf.deb ... Unpacking patch (2.7.5-1) ... Selecting previously unselected package make. Preparing to unpack .../archives/make_4.1-9_armhf.deb ... Unpacking make (4.1-9) ... Selecting previously unselected package binutils. Preparing to unpack .../binutils_2.26-10ubuntu3_armhf.deb ... Unpacking binutils (2.26-10ubuntu3) ... Selecting previously unselected package dpkg-dev. Preparing to unpack .../dpkg-dev_1.18.7ubuntu1_all.deb ... Unpacking dpkg-dev (1.18.7ubuntu1) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... Setting up perl-modules-5.22 (5.22.2-1) ... Setting up libgdbm3:armhf (1.8.3-13.1ubuntu1) ... Setting up libperl5.22:armhf (5.22.2-1) ... Setting up perl (5.22.2-1) ... update-alternatives: using /usr/bin/prename to provide /usr/bin/rename (rename) in auto mode Setting up libdpkg-perl (1.18.7ubuntu1) ... Setting up xz-utils (5.1.1alpha+20120614-2ubuntu2) ... update-alternatives: using /usr/bin/xz to provide /usr/bin/lzma (lzma) in auto mode Setting up patch (2.7.5-1) ... Setting up make (4.1-9) ... Setting up binutils (2.26-10ubuntu3) ... Setting up dpkg-dev (1.18.7ubuntu1) ... Setting up adt-satdep (0) ... Processing triggers for libc-bin (2.23-0ubuntu3) ... (Reading database ... 96886 files and directories currently installed.) Removing adt-satdep (0) ... blame: linux-raspi2 badpkg: rules extract failed with exit code 1 autopkgtest [09:57:50]: ERROR: erroneous package: rules extract failed with exit code 1